Stationary Disinfection Gate 200
- The gate can be mounted on concrete floors with a collecting device or on a steel pan.
- The spray arch consists of a sturdy stainless steel tubular frame with integrated wind-resistant nozzles.
- The arch is stiffened with corner and foot brackets on both sides for stabilisation.
- High-efficiency sensors for the automatic drive-through system are attached to the archway. It has an adjustment option and allows either one-sided or double-sided triggering of the spraying device.
- Constant pressure on the nozzles is generated by a multistage stainless steel centrifugal pump with 200 l/min.
- The technology is safely accommodated in the pump and control box. Optionally, the dosing technology can also be installed here.
- Complete disinfection of vehicles is only possible with mounted floor nozzles.
- Drive-over ramp MBDEST028: Double aluminium floor ramp, 80 cm wide, with floor nozzle string. Laterally and horizontally offset arranged nozzles allow intensive wetting of the underbody area. Dimensions: ramps twice 800 x 750 x 88 mm.
- Drive-over ramp MBDEST029: Hot-dip galvanized steel ramp, 3.52 m wide, with floor nozzle strand. Nozzles offset laterally and horizontally allow intensive wetting of the underbody area. Dimensions: 0.82 x 3.52 x 0.07 m
- Drive-over ramp MBDEST029-02: Stainless steel ramp, 3.52 m wide, with floor nozzle strand. Nozzles offset laterally and horizontally allow intensive wetting of the underbody area, dimensions: 0.82 x 3.52 x 0.07 m